离体肾脏保存实验研究

本文讨论离体肾脏生存机理研究的意义和方法，研制,成功的一种携带式快速和精确控制保存环境温度的脉动灌流型人工生命维持系统，采用微处理器进行实时数据采集，处理和非线性多模式采样控制，用以维持设定的环境参数和维持最佳生存条件，本文是采用猪肾为实验材料，进行多例离体猪肾的保存实验，研究有关环境参数和保养液成分对保存效果的影响，取得良好结果，实验性猪同种异体移植亦已获得初成成功。     

弱凝胶调驱降维数值模拟方法研究

目前用于弱凝胶调驱的化学驱软件大多存在计算速度慢、数值弥散现象严重的问题,为了提高弱凝胶调驱数值模拟的速度和精度,提出了降低维数的模拟方法。利用追踪流线的方法,将弱凝胶调驱的三维渗流问题,转化为沿流线计算饱和度的一维问题,大大降低了求解饱和度方程组中方程的数目,从而提高了计算速度。利用该方法,模拟了玉门老君庙油田一个试验井区的水驱开发历史,优化了弱凝胶调驱的注入浓度、注入速度及注入体积等参数,并预测了弱凝胶调驱的动态,预测该方案可提高采收率7.6%。     

A dynamic programming method for analysis of bridges under multiple moving loads

A dynamic programming (DP) method is presented for analysis of statically determinate and indeterminate bridges subjected to moving loads such as those specified by the American Association of State Highway and Transportation Officials (AASHTO) specifications. These loads consist of uniform lane loading, two-axle truck loading and two-axle truck plus one-axle semitrailer loading. The solution of the DP problem is based on the use of influence line diagrams and extremum functions. Recurrence formulae have been developed for various types of AASHTO live loads. The procedure presented in this article is quite general and can be applied to any type of structures with linear behaviour and any type of moving loads. Six examples are presented: a simply-supported beam, a simply-supported Pratt truss, an arch bridge, a continuous Pratt truss, a continuous frame and a cable-stayed bridge.     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

天然气的储存

随着能源结构的调整,天然气在一次能源中的比重逐步增大,天然气的储存成为人们日益关注的课题,作者就此作一综述。     

基于HMM方法的动态手势轨迹训练性能研究

基于HMM(Hidden Markov Model,隐形马尔可夫模型)对动态手势轨迹的训练是手势识别的关键技术之一。本文对HMM的模型训练采用Baum.Welch算法,并分别从迭代次数,样本个数选取,以及模型初值选取等方面对动态手势轨迹的训练性能进行了研究。实验结果表明HMM方法对具有时空特性的动态手势轨迹识别是非常有效的。     

Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties.     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。